联系我们

公司名称:XXX

电话:XXX

手机:XXX

联系人:XXX

地址:XXX

新闻动态
不锈钢风管的通风特性
不锈钢风管的空气流动性好,有效通流面积大,由于强度大,因此风管振动引起的低频噪声更小,空气流动性能好,系统压降小,日常运行系统耗电量少。目前还可以采用扁椭圆形风管来降低风管的占用空间高度,由于风管的两边是圆形,所以气流稳定,风管的刚性好,外露安装美观性好,是比较理想的风管系列。不锈钢风管的制作是采用带钢带状卷料,通过风管成型机一次咬出咬口骨形,并沿螺旋渐开线轨迹卷成圆形管状,同时将咬口缝压紧,最后按需要的长度切割而成。自投放市场以来,因其本身具有卓越性能及低廉的动作成本,被广泛应用于造船、通风、空调、净化、桥梁除尘、机场、隧道等建筑行业。
Stainless steel air flow duct, the effective flow area, the intensity is high, so the wind pipe smaller low frequency noise caused by vibration, air flow system of good performance, small pressure drop, daily operation of system power consumption. At present, also can be used to reduce the flat oval duct space height wind pipe, because both sides of the wind pipe is circular, so the air duct is stable, good rigidity, good appearance is exposed installation, wind pipe series ideal. The production of stainless steel tube is the strip strip wind roll material, a bite out of the bite bone shape through the wind pipe forming machine, and along the spiral involute trace into circular tubular, and will bite sew tightly, finally according to the need of the length of cut. Since its launch in the market, because of its excellent performance and low cost of action, it is widely used in shipbuilding, ventilation, air conditioning, purification, bridge dust removal, airports, tunnels and other construction industry.
一般而言,通风系统的流量都很大,因此要求使用阻力较小的空气输送管道,以节省造价和运行费用——就最适用。一般情况下使用镀锌铁管,有腐蚀性及特别潮湿的场所使用不锈钢管。
Generally speaking, the ventilation system has a large flow rate, so it is necessary to use the air transmission pipeline with less resistance to save the cost and operation cost. The use of galvanized iron pipes in general, corrosive and wet places especially used stainless steel tube.

联系方式

  1. 公司名称:XXX
  2. 电话:XXX
  3. 手机:XXX
  4. 联系人:XXX
  5. 地址:XXX

版权 © 河北不锈钢风管厂 网址:http://fengguanx.89ix.com  推荐:不锈钢风管,不锈钢螺旋风管,冷风机不锈钢风管

网站建设及优化保定遨游网络公司